工业厂房、仓储物流、机库……这些大型建筑往往需要超大跨度的门，以满足大型设备、车辆甚至飞机的通行需求。与此同时，户外环境的风压、温差等自然因素，也对这些大门提出了极高的性能要求。缇艾迪大型工业门系列，正是为应对这些严苛挑战而生。
工业提升门，大尺度与高强度的结合
TID-TSM工业提升门专为大型工业建筑设计，最大宽度可达10000mm、最大高度可达7000mm，从容应对大型车辆的通行。在抗风性能上，该产品抗风压等级超过10级，门板采用彩钢板+聚氨酯发泡结构，厚度40—80mm，兼顾强度与保温性能。产品配备安全气囊、防钢丝绳断裂装置、扭簧断裂安全装置等多重安全防护，并搭载TID工业门控制系统，支持220/380V电源，保障大型门体稳定可靠运行。
抗风卷帘门，直面台风级考验
在沿海或强风地区，抗风性能是选门的关键指标。TID-KFJ抗风卷帘门通过了SGS抗风报告认证，可抵御超过3000帕的风压，对应17级飓风的考验，产品符合欧标EN 5级标准。门板提供钢制发泡型与钢制单板型选择，配备无线安全气囊、防窜片系统、入轨辅助系统等，并采用TID品牌电机，电机型号覆盖600—3000公斤，最大可做到宽11000mm、高10000mm，以超强的抗风能力守护大型工业建筑的出入口。
柔性大门，灵活应对超大空间
对于机库、场馆等需要超大开启空间的场所，TID-RXM柔性大门提供了灵活的解决方案。该产品可根据需求定制尺寸，帘布采用高强度柔性材料，厚度不小于0.8mm、单位质量900克/平方米，兼具耐热（+80℃）与耐寒（-30℃）性能，撕裂强度达400N，阻燃性能优异，帘布可在3秒内自熄灭。其抗风性能超过12级，使用寿命约10年，配套IP55防护等级控制柜，并配备防坠落等安全装置，为超大空间提供可靠的门体方案。
覆盖机库大门的专业实力
除了上述产品，缇艾迪还针对航空等领域推出了机库大门产品，进一步丰富了大型工业门的产品线。凭借对超大跨度、超高要求的深入理解，缇艾迪能够为不同类型的工业与特种建筑提供量身定制的门体解决方案。
综合方案，让大型建筑更省心
大型工业门的采购与安装往往牵涉诸多专业细节。缇艾迪依托全品类产品体系和综合解决方案能力，能够从需求出发统筹规划，减少客户多方协调的负担，让大型工业门项目更省心、更可控。
从工业厂房到机库场馆，缇艾迪大型工业门系列以超大尺度、超强抗风与可靠品质，撑起了工业建筑的”大门面”，为生产运营提供坚实保障。
Industrial plants, warehousing & logistics facilities, aircraft hangars… These large buildings often require extra-wide doors to accommodate the passage of heavy equipment, vehicles and even aircraft. Meanwhile, outdoor factors such as wind pressure and temperature differences impose stringent performance requirements on these large gates. TID Large Industrial Door Series is engineered to tackle these demanding operating conditions.
Industrial Sectional Doors: Combining Large Dimensions with High Strength
The TID-TSM industrial sectional door is custom-built for large industrial buildings. Its maximum width reaches 10,000 mm and maximum height 7,000 mm, easily enabling passage for oversized vehicles. It achieves wind resistance above Grade 10. The door panel adopts a colour-coated steel sheet with polyurethane foam infill, with thickness ranging from 40 mm to 80 mm, balancing structural strength and thermal insulation.
It is equipped with multiple safety protections including safety airbags, wire rope breakage protection and torsion spring breakage safety devices. Powered by the TID industrial door control system, it supports both 220 V and 380 V power supply to ensure stable and reliable operation of the large door assembly.
Wind-Resistant Roller Shutters: Built to withstand typhoon-level loads
For coastal or high-wind regions, wind resistance is a critical selection criterion. The TID-KFJ wind-resistant roller shutter holds an SGS wind load test report. It can withstand wind pressure exceeding 3,000 Pa, equivalent to Category 17 hurricane loads, and complies with European standard EN Wind Load Class 5.
Two panel options are available: steel foam-filled slats and solid steel slats. It is fitted with a wireless safety airbag, anti-slat-displacement system and rail-assist guiding system. The door uses TID-brand motors with load ratings from 600 kg to 3,000 kg. The maximum size is 11,000 mm wide and 10,000 mm high. Its exceptional wind resistance protects entryways of large industrial buildings.
Flexible Doors: Versatile solution for oversized openings
For hangars, stadiums and other sites requiring extra-large clear openings, the TID-RXM flexible door delivers a flexible solution. Dimensions can be fully customised. The curtain is made of high-tensile flexible material with a minimum thickness of 0.8 mm and a weight of 900 g/m². It withstands high temperatures up to +80 °C and low temperatures down to -30 °C, with a tear strength of 400 N and excellent flame retardancy — the curtain self-extinguishes within 3 seconds.
It offers wind resistance exceeding Grade 12 and an expected service life of around 10 years. It is matched with an IP55 control cabinet and anti-fall safety devices, delivering a dependable door solution for oversized spaces.
Specialised expertise for hangar doors
Beyond the above models, TID also supplies hangar doors for aviation and related sectors, further enriching the large industrial door portfolio. With in-depth know-how for extra-wide spans and high specification requirements, TID delivers customised door solutions for diverse industrial and special buildings.
Integrated solutions for simpler large-scale projects
Procurement and installation of large industrial doors involve many technical details. Supported by a full-range product portfolio and integrated solution capabilities, TID carries out overall planning based on site requirements. This reduces the client’s burden of coordinating multiple suppliers and makes large industrial door projects more manageable and controllable.
From industrial workshops to hangars and stadiums, TID Large Industrial Door Series delivers oversized dimensions, superior wind resistance and reliable quality, forming the grand entrance of industrial buildings and providing solid support for production and operation.
