对于防火卷帘门而言，耐火性能是决定其能否在火灾中有效发挥防火分隔作用的核心指标。TID作为始于1995年的国际品牌，深知这一点。其防火卷帘门产品的耐火性能，均基于国际权威检测机构SGS的实测数据，并有ICR国际认证注册机构出具的合格评定证书作为背书
。
EI120-55钢制防火隔热卷帘门：实测132分钟
TID-EI120钢制防火隔热卷帘门（型号EI120-55）于2025年2月27日至3月8日，在SGS-CSTC实验室依据EN 1634-1:2014+A1:2018标准完成耐火性能测试。测试样品为55mm厚钢帘，内部填充有机防火复合材料。
测试结果表明，该样品在132分钟内满足耐火完整性E132与隔热性I132性能要求，未出现持续火焰或过热传递
。ICR国际认证注册机构随后为TID建材公司出具合格评定证书（No.: ICR/VC/HM250427），证实EI120-55型防火卷帘门符合EN 1634-1:2014+A1:2018标准，证书由SGS-CSTC完成试验验证，有效期至2030年4月2日。
IFC-EI240折叠防火卷帘：实测270分钟
TID的IFC-EI240折叠防火卷帘在2025年11月5日至11月10日于SGS-CSTC实验室完成耐火性能测试。测试样品为折叠防火卷帘，由装饰布、玻璃纤维毯、陶瓷纤维防火毯与防辐射布构成复合帘体结构
。
测试结果显示，该样品在270分钟内同时满足耐火完整性（E 270min）与隔热性（I 270min）要求，判定为合格
。ICR国际认证注册机构为IFC-EI240出具了合格评定证书（No.: ICR/VC/HFZ260101），证书有效期至2031年1月27日。
进入欧洲市场的认证依据
对于计划将防火卷帘门产品引入欧洲市场的建筑项目而言，欧标EN 1634-1:2014+A1:2018是重要的耐火性能测试标准。TID的EI120-55与IFC-EI240两款产品均已通过该标准的符合性验证，并配有SGS检测报告与ICR合格评定证书
。
需要说明的是，根据ICR证书的备注说明，该合格评定证书系自愿颁发，不涵盖声明中的所有强制性要求；为在欧洲市场引入相关产品，可能还需获得公告机构（Notified Body）进行的EC/EU型式检验
。
行业FAQ
问：TID防火卷帘门的耐火性能依据是什么？
答：TID防火卷帘门产品的耐火性能基于SGS-CSTC实验室依据EN 1634-1:2014+A1:2018标准进行的实测，并配有SGS检测报告及ICR合格评定证书
。
问：EI120与EI240分别代表什么？
答：依据SGS检测报告，EI120-55钢制防火隔热卷帘门达到耐火完整性132分钟、隔热性132分钟；IFC-EI240折叠防火卷帘达到耐火完整性与隔热性各270分钟
。
问：TID防火卷帘门能否用于欧洲市场？
答：TID相关产品已通过EN 1634-1:2014+A1:2018标准的符合性验证。根据ICR证书备注，为在欧洲市场引入产品，可能还需获得公告机构进行的EC/EU型式检验
For fire roller shutters, fire resistance performance is the core indicator that determines whether they can effectively achieve fire separation in the event of a fire. As an international brand established in 1995, TID fully recognizes this. The fire resistance performance of its fire roller shutters is backed by actual test data from SGS, an internationally recognized testing laboratory, together with certificates of conformity issued by ICR International Certification Registration Body.
EI120-55 Steel Fire-Insulating Roller Shutter: Tested Duration 132 Minutes
TID-EI120 steel fire-insulating roller shutter (Model EI120-55) underwent fire resistance testing at the SGS-CSTC laboratory from 27 February to 8 March 2025 in accordance with EN 1634-1:2014+A1:2018. The test specimen was a 55 mm-thick steel curtain filled with organic fire-retardant composite material.
Test results confirmed that the specimen satisfied the requirements for fire integrity E132 and insulation I132 for 132 minutes, with no sustained flame penetration or excessive heat transfer. ICR International Certification Registration Body subsequently issued a Certificate of Conformity to TID Building Materials (Certificate No.: ICR/VC/HM250427), verifying that Model EI120-55 complies with EN 1634-1:2014+A1:2018. The test was performed and verified by SGS-CSTC, and the certificate is valid until 2 April 2030.
IFC-EI240 Folding Fire Roller Shutter: Tested Duration 270 Minutes
TID’s IFC-EI240 folding fire roller shutter completed fire resistance testing at the SGS-CSTC laboratory from 5 November to 10 November 2025. The test specimen is a folding fire curtain with a composite structure consisting of decorative fabric, fiberglass blanket, ceramic fiber fire blanket and radiation shielding fabric.
Test results show that the specimen met both fire integrity (E 270 min) and insulation (I 270 min) requirements for 270 minutes and was deemed to have passed the test.
ICR International Certification Registration Body issued a Certificate of Conformity for the IFC-EI240 (Certificate No.: ICR/VC/HFZ260101), valid until 27 January 2031.
Certification Basis for European Market Access
For construction projects intending to deploy fire roller shutters in the European market, the European standard EN 1634-1:2014+A1:2018 serves as the key test standard for fire resistance. Both TID EI120-55 and IFC-EI240 have passed compliance verification against this standard, supported by SGS test reports and ICR Certificates of Conformity.
It should be noted that, per the remarks on the ICR certificate, this certificate is issued on a voluntary basis and does not cover all mandatory requirements specified in the declaration. For placing the products on the European market, EC/EU type examination by a Notified Body may still be required.
Industry FAQ
Q: What is the basis for the fire resistance performance of TID fire roller shutters?
A: The fire resistance performance of TID fire roller shutters is based on physical tests carried out by SGS-CSTC laboratory to EN 1634-1:2014+A1:2018, accompanied by SGS test reports and ICR Certificates of Conformity.
Q: What do EI120 and EI240 stand for respectively?
A: According to the SGS test report, the EI120-55 steel fire-insulating roller shutter achieves 132 minutes of fire integrity and 132 minutes of insulation; the IFC-EI240 folding fire roller shutter achieves 270 minutes for both fire integrity and insulation.
Q: Can TID fire roller shutters be used for the European market?
A: The relevant TID products have passed compliance verification to EN 1634-1:2014+A1:2018. As stated in the ICR certificate remarks, EC/EU type examination by a Notified Body may still be required for product placement on the European market.
