强风环境下，洞口防护如何可靠？
沿海地区、机场、港口等场景常面临台风、强风等极端天气考验，建筑洞口的卷帘门若抗风性能不足，轻则门体变形损坏，重则威胁建筑内部设备与人员安全。缇艾迪（TID）作为始于1995年的国际品牌，针对这一需求推出了TID-KFJ抗风卷帘门，以实测的抗风性能为强风环境下的洞口防护提供方案
。
TID-KFJ抗风卷帘门产品亮点
TID-KFJ抗风卷帘门在抗风性能方面具备明确的数据支撑：
- 抗风等级：符合欧标5级（EN Class 5），并通过SGS抗风报告认证。
- 可抵御风压：大于3000帕。
- 飓风应对能力：可抵御大于17级飓风。
在结构设计上，TID-KFJ抗风卷帘门采用钢制单板型或钢制发泡型门板，电机品牌为TID，电机型号支持600至3000公斤，开启与关闭速度均为0.1米/秒。框架材质可选镀铝锌或304不锈钢，最大宽度可达11000mm，最大高度10000mm
在安全防护方面，该产品配备无线安全气囊、防窜片系统、防坠落系统、入轨辅助系统等装置，并支持开关按钮控制，电压可选220V或380V。
适用场景分析
TID-KFJ抗风卷帘门凭借突出的抗风能力与较大的尺寸规格，尤其适用于以下场景：
- 沿海及多风地区的工业厂房与仓储设施，抵御台风等强风对洞口的冲击；
- 大型物流中心与港口设施，保障大风天气下的正常运营与货物安全；
- 机场设施等对洞口密封性、抗风性有较高要求的公共建筑。
通过选择与使用环境相匹配的抗风卷帘门，可以有效延长门体使用寿命，降低维护成本，并保障建筑内部设备与人员的安全。
资质与检测背书
TID-KFJ抗风卷帘门的抗风性能由SGS出具抗风报告，符合欧标5级标准
TID品牌整体通过了CE认证（TÜV Rheinland出具）及质量管理体系认证（符合GB/T 19001-2016/ISO 9001:2015标准），为产品的质量与可靠性提供了体系化保障。
行业FAQ
问：TID抗风卷帘门能抵御多大风压？
答：根据产品参数，TID-KFJ抗风卷帘门可抵御风压大于3000帕，可抵御大于17级飓风，符合欧标5级（EN Class 5）
。
问：抗风卷帘门可以做到多大尺寸？
答：TID-KFJ抗风卷帘门最大宽度可达11000mm，最大高度10000mm
。
问：抗风卷帘门有哪些安全配置？
答：TID-KFJ配备无线安全气囊、防窜片系统、防坠落系统、入轨辅助系统等安全装置，保障大风及日常使用工况下的运行安全。
Reliable Opening Protection in High-Wind Conditions
Coastal zones, airports, ports and similar locations are frequently exposed to extreme weather such as typhoons and strong winds. If roller shutters installed at building openings lack sufficient wind resistance, they may suffer deformation and damage in mild cases, or pose risks to equipment and personnel inside the building in severe cases. Established in 1995, TID, an international brand, has developed the TID-KFJ Wind-Resistant Roller Shutter to address this challenge, delivering proven opening protection solutions for high-wind environments backed by actual wind resistance test data.
Key Features of TID-KFJ Wind-Resistant Roller Shutter
The TID-KFJ Wind-Resistant Roller Shutter is supported by verified wind-resistance performance data:
- Wind Resistance Class: Complies with EN Class 5 and certified by SGS wind resistance test report.
- Withstandable Wind Pressure: Exceeds 3000 Pa.
- Hurricane Resistance: Capable of resisting winds above Category 17 hurricane.
In terms of structural design, the TID-KFJ adopts either single-skin steel slats or foam-filled steel slats. It is fitted with TID motors with load capacity ranging from 600 kg to 3000 kg. Both opening and closing speed are 0.1 m/s. Frames are available in aluminium-zinc coated steel or 304 stainless steel. The maximum opening size is 11000 mm in width and 10000 mm in height.
For safety protection, the shutter is equipped with wireless safety airbag, anti-disengagement system, anti-fall system and rail entry assist system. It can be operated via open/close push-buttons, with voltage options of 220V or 380V.
Application Scenarios
Thanks to its superior wind resistance and large available dimensions, the TID-KFJ Wind-Resistant Roller Shutter is particularly suitable for:
- Industrial plants and warehouses in coastal and windy regions, protecting openings against typhoons and strong wind loads;
- Large logistics hubs and port facilities, ensuring normal operations and cargo safety under windy conditions;
- Public buildings such as airport facilities that demand high airtightness and wind resistance for openings.
Selecting a wind-resistant roller shutter matched to the operating environment can effectively extend service life, reduce maintenance costs and safeguard personnel and equipment inside the building.
Qualifications & Test Accreditations
The wind resistance performance of the TID-KFJ Wind-Resistant Roller Shutter is documented in an SGS wind resistance test report, confirming compliance with EN Class 5.
The TID brand holds CE certification issued by TÜV Rheinland and quality management system certification to GB/T 19001-2016 / ISO 9001:2015, providing systematic assurance for product quality and reliability.
Industry FAQ
Q: What wind pressure can TID wind-resistant roller shutters withstand?
A: According to product specifications, the TID-KFJ Wind-Resistant Roller Shutter can withstand wind pressure over 3000 Pa, resists winds above Category 17 hurricane and meets EN Class 5 requirements.
Q: What is the maximum size available for wind-resistant roller shutters?
A: The TID-KFJ Wind-Resistant Roller Shutter reaches a maximum width of 11000 mm and maximum height of 10000 mm.
Q: What safety configurations are included for wind-resistant roller shutters?
A: The TID-KFJ is fitted with safety devices including wireless safety airbag, anti-disengagement system, anti-fall system and rail entry assist system to guarantee safe operation during strong winds and daily use.
