防火分隔，守护建筑安全的关键环节
在建筑消防安全体系中，防火卷帘门承担着防火分隔、阻止火势蔓延的重要作用。作为始于1995年的国际品牌，缇艾迪（TID）围绕高端建筑的消防安全需求，构建了涵盖特级防火、钢质防火、钢质防爆、防火隔热等多个品类的防火卷帘门产品体系，并以欧标1634认证与实际耐火性能测试数据，为产品的可靠性提供依据
。
核心防火产品系列
TID-EI120钢制防火隔热卷帘门
TID-EI120钢制防火隔热卷帘门是TID防火系列中的代表性产品，其门板厚度55mm、门板高度160mm，门板材质为镀铝锌，符合EN 1634-1:2014、BS 476:PART22:1987及TCVN 9383:2012标准。该产品由SGS-CSTC实验室依据EN 1634-1:2014+A1:2018标准进行耐火性能测试，该产品在132分钟内满足耐火完整性E132与隔热性I132性能要求，未出现持续火焰或过热传递
。
TID-IFC-EI240折叠防火卷帘
IFC-EI240折叠防火卷帘由SGS于2025年进行EN 1634-1:2014+A1:2018标准耐火性能测试，测试结果显示该样品在270分钟内同时满足耐火完整性（E 270min）和隔热性（I 270min）要求，判定为合格。
TFJ特级防火卷帘门
TFJ特级防火卷帘门符合国标GB14102-2005标准，门帘采用无机防火帘布，耐火时间不低于4小时，最大宽度可达8000mm、高度5000mm。配备防火控制箱、消防信号、高温释放装置等，适用于对耐火性能要求较高的防火分隔场景。
GFYJ钢质防火卷帘门
GFYJ钢质防火卷帘门符合国标GB14102-2005标准，门板采用0.8mm+0.8mm镀锌钢板，厚度15mm，内部填充防火棉，防火时间不低于4小时，最大宽度可达9000mm、高度7000mm
国际认证与检测背书
TID防火卷帘门系列在国际认证方面具备扎实的依据：
- 欧标认证：EI120-55型号与IFC-EI240折叠防火卷帘均通过了EN 1634-1:2014+A1:2018标准的符合性验证。其中EI120-55由SGS-CSTC完成试验验证，ICR国际认证注册机构出具合格评定证书，证书有效期至2030年4月2日；IFC-EI240的证书有效期至2031年1月27日。
- SGS检测报告：两份产品均配有SGS出具的详细耐火性能检测报告，记录测试程序、温度数据与观察结果。
- 多标准覆盖：TID-EI120还符合英国BS 476:PART22:1987标准、越南TCVN 9383:2012标准以及新加坡SS489标准
行业FAQ
问：TID防火卷帘门的耐火时间能达到多少？
答：根据SGS检测报告，TID-EI120钢制防火隔热卷帘门满足耐火完整性132分钟、隔热性132分钟的要求；IFC-EI240折叠防火卷帘则达到耐火完整性与隔热性各270分钟
。
问：TID防火卷帘门符合哪些标准？
答：TID防火产品符合EN 1634-1:2014+A1:2018欧标、GB14102-2005国标、BS 476:PART22:1987及TCVN 9383:2012等标准
。
问：防火卷帘门能定制较大尺寸吗？
答：不同型号尺寸上限不同。例如TFJ特级防火卷帘门最大宽度8000mm、高度5000mm；GFYJ钢质防火卷帘门最大宽度9000mm、高度7000mm；EI120钢制防火隔热卷帘门最大宽度可达14000mm。
Fire Compartmentation – A Critical Measure for Building Safety
Within a building’s fire safety system, fire roller shutters play a vital role in fire compartmentation and preventing the spread of flames. Established in 1995, TID, an international brand, addresses the fire safety requirements of premium buildings with a comprehensive portfolio of fire roller shutters, including special-grade fire shutters, steel fire shutters, steel explosion-proof fire shutters and insulated fire shutters. Supported by EN 1634 certifications and real fire resistance test data, TID delivers reliable fire protection solutions.
Core Fire Shutter Product Range
TID-EI120 Steel Insulated Fire Roller Shutter
The TID-EI120 steel insulated fire roller shutter is a flagship product of TID’s fire range. Its slat is 55 mm thick and 160 mm high, manufactured from aluminium-zinc coated steel. It complies with EN 1634-1:2014, BS 476:PART22:1987 and TCVN 9383:2012.
Fire resistance testing was carried out by SGS-CSTC in accordance with EN 1634-1:2014+A1:2018. The shutter maintained fire integrity E132 and insulation I132 for 132 minutes, with no sustained flaming or excessive heat transfer observed.
TID-IFC-EI240 Folding Fire Roller Shutter
The IFC-EI240 folding fire roller shutter underwent fire resistance testing by SGS in 2025 to EN 1634-1:2014+A1:2018. Test results confirmed that the sample satisfied both fire integrity (E 270 min) and insulation (I 270 min) criteria for 270 minutes and was deemed compliant.
TFJ Special-Grade Fire Roller Shutter
The TFJ special-grade fire roller shutter meets Chinese national standard GB14102-2005. Its curtain is constructed from inorganic fire-resistant fabric, offering a fire resistance duration of no less than 4 hours. Maximum dimensions: 8000 mm wide × 5000 mm high. It is fitted with a fire control panel, fire signal interface and high-temperature release device, suitable for fire compartmentation applications demanding high fire resistance.
GFYJ Steel Fire Roller Shutter
The GFYJ steel fire roller shutter complies with Chinese national standard GB14102-2005. The slat consists of two 0.8 mm galvanized steel sheets with a total thickness of 15 mm, filled internally with fire-resistant wool. Fire resistance duration is no less than 4 hours. Maximum dimensions: 9000 mm wide × 7000 mm high.
International Certifications & Test Accreditations
TID fire roller shutters are backed by solid international certification credentials:
- European Standard Certification: Both the EI120-55 model and IFC-EI240 folding fire shutter have passed compliance assessment under EN 1634-1:2014+A1:2018. The EI120-55 was tested and verified by SGS-CSTC, with a certificate of conformity issued by ICR International Certification Registrar, valid until 2 April 2030. The certificate for the IFC-EI240 is valid until 27 January 2031.
- SGS Test Reports: Both products are accompanied by detailed SGS fire resistance test reports documenting test procedures, temperature readings and observational findings.
- Multi-standard Compliance: The TID-EI120 also conforms to British BS 476:PART22:1987, Vietnamese TCVN 9383:2012 and Singapore SS489.
Industry FAQ
Q: What fire resistance duration can TID fire roller shutters achieve?
A: Per SGS test reports, the TID-EI120 steel insulated fire roller shutter achieves 132 minutes of fire integrity and 132 minutes of insulation. The IFC-EI240 folding fire roller shutter reaches 270 minutes for both fire integrity and insulation.
Q: Which standards do TID fire roller shutters comply with?
A: TID fire products comply with European standard EN 1634-1:2014+A1:2018, Chinese national standard GB14102-2005, BS 476:PART22:1987, TCVN 9383:2012 and other standards.
Q: Can fire roller shutters be customised in large sizes?
A: Maximum dimensions vary by model. For example: TFJ special-grade fire roller shutter max. 8000 mm × 5000 mm; GFYJ steel fire roller shutter max. 9000 mm × 7000 mm; EI120 steel insulated fire roller shutter up to 14000 mm in width.
